logo catamaran sailing at TheBeachcats.com
    
Lost Password?  Register free!

Supporters of TheBeachcats.com

Thanks go to our
Business Sponsors

 

You can help too!


Ad Block


By Gary Friesen -- I was about 21 years old and had just bought my first Hobie 16. It was a beat up, old red thing with plain white sails. I wasn't proud of her appearance, but I could afford her. I think that I paid about $350, on the trailer. As usual, I had no crew.

My niece who was about 9 years old at the time, was a good swimmer, body-surfer, and had taken some kind of a junior life saving swimming pool class. The two of us had swum like fish together in the ocean surf, many times. So I invited her along for a possible boat ride. I invited my parents too. It was a ploy. I could tell them that they were needed to baby-sit my niece in case I found it unsafe to take her on the boat. This way, I did not have to admit that I wanted my father there in case I couldn't raise the mast or get the boat back onto the trailer.

I had sailed my friend, Dan's Hobie 16 in a lake and had sailed my 12' mono hull in another local lake. Both experiences were lacking much wind. I knew where to find wind; the Pacific Ocean. I was familiar with where all the public motorboat launches were and I chose the one that I thought looked like it had best access. I was not too far from a well-known catamaran beach at Claremont Street but did not know anything about Claremont.

Los Angeles harbor is huge, a hundred square miles. It seemed like a good place to get ocean breeze while not being too affected by the surf. I headed to Cabrillo Beach public boat launch in San Pedro. When I got there, the wind was already blowing pretty hard and I was noticeably intimidated. I spoke to one of the locals and asked about how windy it gets there. He found out that I was a rookie and immediately told me that I was at the wrong place. I did not know that I was at the windiest hole in Los Angeles that carries the nickname "Hurricane Gulch!"

Note: Thanks Gary, for this sentimental story of the beginning of your catamaran journey.

The Hobie HOTLINE, the original publication for Hobie Cat news, has returned. The Hobie HOTLINE started in 1971 as a little newsletter for Hobie Cat owners but grew into a full-fledged magazine thought the 80's and early 90's. In the mid-80's, the HOTLINE began to loose its way. It became more of a marketing tool for the Coleman Company, promoting Alpha sailboards, Hobie Power Skiffs and other Coleman products. The Hobie Class Association started the NAHCA News newsletter in 1992 in part because the HOTLINE was trying to serve too many masters. Eventually the HOTLINE became a financial burden on the Hobie Cat Company (now independent of Coleman), who ceased publication in mid-1995.

For ten years after the demise of the HOTLINE, the NAHCA News/HCA News kept plugging along, filling the void. In the last ten years, the HCA News has grown into a professionally produced magazine, comparable to the original HOTLINE. So, the Hobie Class Association has changed the name of its bi-monthly publication to the Hobie Class Association HOTLINE. For many the name change will bring back memories of "the good old days." Not to mention the fact that Hobie HOTLINE rolls off the tongue more easily than Hobie Class Association News.


Repairing a dent in a mast sail track.

I have had two masts that had a dent near the sail track, and was able to repair them with this method. Here's a photo of the Prindle 19 mast that I just received. As you can see, the area is pinched enough to cause problems when raising the main.

I use thin hardened metal as spacers to spread out the pressure that is applied with a tapered device. In other words, I drive a screwdriver in between a couple putty knives. To keep the straight side from getting damaged, be sure to use a thicker piece of metal as a backer on that side. I started out with two putty knives and advanced to a heavier piece of stainless steel when the track was opened up a little. As you can see in the mast dent repair photos, it does a great job of opening the track back up.

When you have a straight opening in the groove, you might touch up the area with a fine metal file.

Good luck,

Jack Hoying
Fort Loramie, Ohio
Note: Thanks for sharing Jack!
 

Amateur Sail Builder, Rolf NilsenAmateur sail building..

Scene: The sails on your catamaran looks (and pulls) like they have been trough both WWI and II. However you are seriously short on money, as the "admirals" priorities have your boat a long way down on the list (mortgages on the house, food, electricity and even gas are higher on the list, go figure..). So, what do you do? You gather all the creativity and initiative you normally pump into your sailing sessions, make a good deal on some sailcloth, keep on chanting "Navigare necesse est!" and build your own sails.

When we bought our current Tornado in 2001, a set of sails from year 2000 came with the boat. The Tornado class changed their sailplan after the 2000 Sidney Olympics, so these sails were a first generation cut. We used these sails both for training and competition until 2004, when we bought a well used asymmetric spinnaker from the Swedish Olympic Tornado team. Strangely enough, there was a huge difference in the power and speed this asymmetric developed compared with our 2000 asymmetric (I'm being ironic).

After this discovery, we began studying our main and jib with a critical eye. Compared to other T's, we were lacking both power and windward ability. A common problem with sails where the draft has moved aft. When hit by a gust, the boat wanted to heel instead of squirting forward, no matter how much we "massaged" the downhaul during gusts.Wanting to stay competitive with the fleet on the beat, it was time for some new sails. Besides, the old sails were literally falling apart. The luff tape on the main was so worn that hoisting and unhooking the main was a chore at every outing.
Note: Thanks Rolf! I'm sure this will benifit some enterprising beachcat sailors.

All who sailed or attempted to sail to Catalina Island this past weekend had a wonderful time.

From Cabrillo Beach in San Pedro, we had 4 Inter 20's, a Prindle19, a Nacra 5.8, a C-class cat, a Warrior 29, a Tornado, and a Reynolds 33. The C-class cat opted out when it looked highly improbable that anyone would actually reach the island before dark-thrity. Chris on the Tornado also turned back, as he had planed to because he only had one sailing day available.

Solo sailors included Chris on his Tornado, Lee on his Inter 20, Alan on his Inter 20, and John on his Reynolds 33. Also Kelly single-handed from Newport Beach on a 30' Piver trimaran.

Those who had motors used them quite a bit and those who didn't were either towed at times or did lots of paddling. The one exception was Alan, who took a ride on the C-class cat Friday, then sailed himself over to the island on his Inter 20 on Saturday when he had wind for the whole trip. He may also have been the only one in the entire fleet to have landed when there was still some daylight.

The Marina Del Rey fleet that was to consist of a Viva 27, a Reynolds 21, and a Hobie 21, a Hunter 42, and a Choate 40 had no wind on Friday. The Hunter did not go. Geoff, on the Viva 27 motored all the way to Twin Harbors. Chris and Richard from the Choate made the crossing on an 18' Whaler with a 150 horsepower grinder. I presume that the Reynolds 21 didn't set sail. I spoke with Collin who sailed the Hobie 21 on Saturday and made it to approximately the shipping lanes and having not been to Twin Harbors before, opted to turn back to the coast where they made an emergency night landing for safety. They sailed back to Marina Del Rey on Sunday and it was a very long haul for them. They accepted a tow from a passer-by when they got close to the harbor. It took them 4 hours to get close to the harbor from Point Vicente.
Note: Thanks Gary, for that great report!

<   111121314151617181920212223242526272829303132333435363747   >